产品中心
PRODUCT CENTER
AMD芯片
GENOA2D24TM3-2L+
产品详情
Specifications
| Physical Status | |
| Form Factor | Proprietary T-shape |
| Dimensions | 18.8607" x17.0149" |
| Processor System | |
| CPU | Supports AMD EPYC™ 9004 series processors |
| Socket | Dual Socket SP5 (LGA 6096) |
| Chipset | System on Chip |
| System Memory | |
| Supported DIMM Quantity | 12+12 DIMM slots (1DPC) |
| Supported Type | Supports DDR5 288-pin RDIMM, RDIMM-3DS |
| Max. Capacity per DIMM | RDIMM: 64GB (2R) RDIMM-3DS: 512GB (2S8Rx4) |
| Max. DIMM Frequency | 4800 MHz |
| Voltage | 1.1V |
| PCIe Expansion Slots (SLOT7 close to CPU) | |
| PCIe x 32 | SLOT1: Gen-Z HP+8C (2 PCIe5.0 x16 / 2 CXL1.1 x16) [CPU1] SLOT2: Gen-Z HP+8C (2 PCIe5.0 x16 / 2 CXL1.1 x16) [CPU0] |
| PCIe x 16 | SLOT3: Gen-Z 4C+ (PCIe5.0 / CXL1.1 x16) [CPU0] |
| Other PCIe Expansion Connectors | |
| M.2 slot | 1 M-key (PCIe3.0 x4), supports 2280/2260/2242/2230 form factor [CPU0] 1 M-key (PCIe3.0 x4), supports 2280/2242 form factor [CPU1] |
| Others | 2 MCIO (PCIe5.0 x8 or 8 SATA* 6Gb/s) [CPU0] 2 MCIO (PCIe5.0 x8 or 8 SATA 6Gb/s) [CPU0] 4 MCIO (PCIe5.0 x8) [CPU1] *MCIO1 and MCIO2 support PCIe only while installing 2 processors |
| SATA/SAS Storage | |
| PCH Built-in Storage | AMD EPYC™ 9004 (Up to 32 SATA 6Gb/s): 4 MCIO |
| Ethernet | |
| Additional GbE Controller | Intel® i350: 2 RJ45 (1GbE) |
| OCP slot | 1 OCP NIC 3.0 (PCIe5.0 x16) [CPU1] |
| Server Management | |
| BMC Controller | ASPEED AST2600 |
| IPMI Dedicated GLAN | 1 Realtek RTL8211F for dedicated management GLAN |
| Graphics | |
| Controller | ASPEED AST2600 |
| VRAM | DDR4 512MB |
| Rear I/O | |
| UID Button/LED | 1 UID button w/ LED |
| VGA Port | 1 DB15 (VGA) |
| Serial Port | 1 RJ45 (COM) |
| USB 3.2 Gen1 Port | 2 Type-A (USB3.2 Gen1) |
| RJ45 | 2 RJ45 (1GbE) 1 dedicated IPMI |
| Internal Connector/Headers | |
| Power Connector | 2 (CRPS IN +12V/+12VSB, max. 2700W) |
| Other Power Connectors | 3 (2x4 pin, 12V) for GPU cards, 1 Micro-fit (2x3 pin, 12V, 3V, 3.3VSB) for Riser or Internal SSD, 1 Micro-fit (2x8 pin, 12V, 5V) for HSBP, 1 (2x6-pin, 12V) for HSBP |
| Auxiliary Panel Header | 1 (26-pin): system fault LED, locate, SMBus |
| VGA header | 1 |
| Speaker Header | 1 (4-pin) |
| Fan Header | 6 (2x3-pin) for 2U system, 8 (2x4pin) for 1U system |
| Thermal Sensor Header | 1 |
| TPM Header | 1 (13-pin,SPI) |
| SGPIO Header | 4 |
| HSBP | 1 |
| SMBus header | 3 |
| PMBus header | 1 |
| IPMB Header | 1 |
| Clear CMOS | 1 (contact pads) |
| USB 3.2 (Gen1) Header | 1 (26-pin, 1 USB3.2 Gen1) |
| NMI Header | 1 |
| LED Indicators | |
| Standby PWR LED 5vsb | 1 (3.3VSB) |
| 80 Debug Port LED | 1 |
| Fan Fail LED | 8 |
| BMC heartbeat LED | 1 |
| System BIOS | |
| BIOS Type | AMI UEFI BIOS; 256 Mb (32MB) SPI Flash ROM |
| BIOS Features | ASRock Rack Instant Flash, ACPI 6.4 and abouve compliance wake up events, SMBIOS 3.5.0 and above, Plug and Play(PnP) |
| Hardware Monitor | |
| Temperature | CPU, MB, Card side Temperature Sensing |
| Fan | Fan Tachometer CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by CPU Temperature) Fan Multi-Speed Control |
| Voltage | P0_VDDCR_CPU0, P0_VDDCR_CPU1, P0_VDDCR_SOC, P0_VDD_18_DUAL, P0_VDD_11_S3, P0_VDDIO, P1_VDDCR_CPU0, P1_VDDCR_CPU1, P1_VDDCR_SOC, P1_VDD_18_DUAL, P1_VDD_11_S3, P1_VDDIO, +BAT, +12V, +3VSB, +5VSB |
| Environment | |
| Temperature | Operation temperature: 10°C ~ 35°C / Non operation temperature: -40°C ~ 70°C |
| Humidity | Non operation humidity: 20% ~ 90% ( Non condensing) |
